Index >> Products >> Monitoring >> Poseidon xxxx
Poseidon 3266: SNMP Thermometer & DI
Temperature / humidity measurement and monitoring of 4 dry contacts over a LAN (Web, SNMP, E-mail). A MS Excel reporting software with is graphs included for free.
| The Poseidon 3266 is a SNMP and web enabled environmental monitor (temperature, humidity, dry contact).
Four digital inputs (dry contacts) can be used for connecting door contacts, smoke detectors, water flood detectors, detectors of cooling fan failure or 230V supply failure.
Poseidon alerts you by Email or SNMP Trap in case a value is out of a defined range. When an input contact is closed, Poseidon alerts you by email or a SNMP trap. The alert can be delayed by a defined time (an e-mail is sent if a cabinet door has been open for more than 5 minutes).
- You can connect up to 5 temperature or humidity sensors.
- 4 dry contact inputs (Door contacts, power or smoke detectors)
- Opened door or temperature over limit will send an Email or SNMP trap.
|
|
With the HWg-PD Trigger software, alerts can be redirected to SMS or processed according to the PD Trigger rules. You can switch remote relay over IP or shut down a PC.
In a typical application, Poseidon 3266 monitors the environment and controls the doors in cabinets or technology rooms (telecommunication nodes, rack rooms, server rooms).
Features
- Ethernet: RJ45 (10BASE-T)
- WEB: Embedded WEB server / GUI
- Sensors: RJ11 1-Wire (max 5 sensors) - Temperature & humidity
- Inputs: 4 dry contact inputs (for detectors)
(Smoke, power, water leak, door contact, air flow, entry to the room)
- M2M protocols: SNMP, XML and Modbus/TCP
- Sending SMS: SMS can be sent by remote "SMS GW" device without any additional software (netGSM function).
- Physical features: plastic housing, dimensions: 36 x 102 x 76 [mm]
- Response to thresholds: SNMP trap, E-mail
- Support for programmers: HWg SDK
- Supported software
>> Poseidon model XXXX - overview of models
Application
Sensors
 1-Wire sensors
- Total bus length max 60 m
- Each sensor has its own SafeRange. When the range is exceeded (alarm), e-mail or SNMP trap is invoked.
DI (Dry contact inputs) for detectors:
>> More sensors
Topology
- WEB (HTML)
Values and state of sensors are presented on WWW page. The page is automatically reloaded every 5 seconds. There is a link to the Flash Setup, FirmWare update and others from the main HTML page.
- XML
All sensor's values as well as alarm status information are available in XML files (values.xml) and any application can log it from XML tags - more information
- SNMP
SNMP is a protocol for monitoring telecommunication devices, network infrastructure and related technology. The Poseidon is fully controllable over SNMP (v1, partially v2) - more information
- Modbus/TCP
Modbus/TCP is industrial standard for input from sensors and output to visualizing and SCADA systems. All values are available over Modbus/TCP - more information
- Alarms
- SNMP Traps
In case of exceeding "Safe Range" the sensor gets to Alarm status. To notify of this a SNMP Trap including alarm status description is sent to configured IP address - more information
- Email
In case of exceeding "Safe Range" the sensor gets to Alarm status. To notify of this an Email including alarm status description is sent to configured email address - more information
>> Poseidon –
communication protocols
Technical specification
| Port 1 - Ethernet port |
|
| + LAN |
RJ45 (10BASE-T) – 10 Mbit or 10/100 Mbit network
compatible |
| + Supported protocols |
IP: ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP) |
| + SNMP compatibility |
Ver:1.00 compatible, some parts of the ver 2.0 implemented |
| |
| Port 2 - 1-Wire sensor bus |
|
| + Connector |
RJ12 (6 pins - 4 pins used only = RJ11 compatible) |
| + Sensors / distance |
max. 60 m total length |
| |
| Port 3 - Dry contact inputs |
|
| + 4 Contact inputs |
Connect it with a contact directly (dry contact). |
| + Sensor type |
NO or NC contact switch |
| + Max distance |
Up to 30 m |
| |
| LED Status indicators |
| + POWER |
Green - power
OK |
| + LINK & Activity |
Yellow - Ethernet
connectivity |
| |
| DIP SWITCH configuration |
| + DIP1 - RS--232 Setup mode |
Not used |
| + DIP2 - Security |
ON = Security mode - remote configuration
disabled
OFF = Non-Security mode - remote configuration enabled |
| |
| Physical parameters |
|
| + Voltage requirements |
9 - 15V / 250 mA DC
coaxial power connector (barrel),
GND on the shield |
| + Dimensions |
35 x 101.6 x 76.2 [mm] (H x W x D ) |
| + Weight |
150 g |
Which software to use
- Configuration: UDP Config - IP address configuration
- Event processing: PD Trigger - reacts to events
- Monitoring and logging: HWg-PDMS - Monitoring software with MS Excel reporting
- Simple Visualization: SNMPcap - I/O and sensors
- Visualization: CapTemp - Process monitoring and control
- Other applications: Third-party SNMP software
- For programmers: HWg-SDK contains interface descriptions and examples of using M2M protocols in several programming languages
PD Trigger application example
With the PD Trigger application for Windows, it is possible to receive alarms (SNMP traps) from an unlimited number of Poseidon products and define conditions and actions based on the originating device and the probe name. For example:
- In case of air conditioning failure in server room A, send a SMS to Peter
- In case of alarm in server room B, send en E-mail to Tom
- In case of electricity supply failure anywhere, send SMS to Peter and turn on a warning light at the receptionist's desk
>> Software for the Poseidon family
Sample ordering
- How long does it take to send the ordered samples?
We keep Poseidon 3266 units on stock and we supply samples them within 24 to 48 hours. We will confirm the delivery time via email.
- What warranty you offer?
The standard is 2 years, it can be extended after agreement..
- Where do I get the price?
You can ask HW group distributors, or request the price directly from us (HW group form).
- How to find out the price of Poseidon, sensors and accessories for my project?
Ask by the HW group form.
Fill in number of sensors, individual distance and what values exactly you intend to measure. Do not forget to mention what software you will use for data processing or what do you expect from the program. Tell us where you are from, we may recommend you installation company in your surroundings
- Can I pay by card?
Yes but not online. Fill in the online order form, print it out. Write your bank card details, sign it and fax it to our fax number. The other possibility is to pay via bank transfer.
- How do you supply the order?
We use several transport companies and FedEx for express shipments.
Order number
Accessories for Poseidon model 3266
 Power adapter
- Accessories for the 1-Wire bus (RJ11)
 Poseidon
T-Box [600
040]
Hub for up to 5 probes over 1-Wire bus (5x RJ11), connecting cable 0,1 meter long.
 Poseidon
T-Box2 [600
280]
Hub for up to 2 probes over 1-Wire bus (2x RJ11), connecting cable 3 meter long.
Keywords
| SNMP thermometer, dry contact snmp, door contact monitoring
excel reporting racks room, environmental monitoring system, DI SNMP, dry contact alarm, temperature, humidity, smoke, power failure |
Similar and related products
|
Poseidon Family - all Poseidon family products
Online demo
Configuration: 
